 |
Pumps and
Controllers |
|
  |
 |
Redi-Flo
Submersible Environmental Pumps INW is one of only
seven U.S. Environmental Product Master Distributors for Grundfos
environmental pumping products. Built with 316 stainless steel, Teflon®, and
Viton®, these submersible pumps are rugged enough to handle the rigors of
contaminated groundwater applications. |
 |
|
 |
|
| Redi-Flo2®
Variable Performance Pump |
 |
This pump is designed for
long term dedicated use, yet is light weight enough for portable use. Coupled with the Grundfos VFD variable controller, it makes a superb sampling device.
- 2" and up well diameter
- Up to 250 foot head
- 100 ml/min - 9 gal/min flow
rates
Check out both
INW's DEDICATOR®
(fixed) and REEL E-Z® (portable) sampling
systems featuring Redi-Flo2® pumps.
Top
of Page |
|
|
| Redi-Flo4®
Variable Performance Pump |
 
|
This is a rugged, heavy-duty
pump designed to handle continuous operation in contaminated environments. When coupled
with the Grundfos VFD controller, this pump makes an excellent sampling
device.
- 4" and up well diameter
- Up to 524 foot head
- 100 ml/min - 50 gal/min flow
rates
Top
of Page |
|
|
| Redi-Flo4®
Fixed Performance Pump |
 |
This robust, heavy-duty pump
comes in a wide variety of configurations to meet a range of remediation and pump out
needs. No need for an external controller - simply install in well and attach power.
- 4" and up well diameter
- Up to 650 foot head
- 5 - 25 gal/min flow rates
- 1/2 - 2 h.p. motors available
- 110/220/460 volt AC
Top
of Page |
|
|
| Redi-Flo3
Programmable Submersible Pump |
 
|
This pump is a true
programmable pump. The 2-wire motor lead serves as a communication cable for diagnostics
and programming. Built-in protection against dry-run, over/under voltage, overload, and
over temperature eliminates the need for external motor monitoring. The Redi-Flo3 can be
used in a variety of remediation applications including traditional pump and treat,
leachate recovery, and ground water depression.
- 3" and up well diameter
- Up to 600 foot head
- 5 - 30 gal/min flow rates
- Warm water tolerance
- Telephone modem surveillance
Top
of Page |
|
|
 
|
Redi-Flo
VFD Pump Controller The Redi-Flo Variable Frequency Drive is
specially designed to control and protect Redi-Flo2® and Redi-Flo4®
variable performance pumps.
- Precise Flow Control
- Motor Protection
- Dry-Run Protection
- 120V / 230V, single-phase AC
- NEMA 4 Enclosure
Top
of Page |
|
|