 |
 |
| INW
is pleased to provide these conversion factors and various technical data to help your
water monitoring and sampling project so smoothly. |
|
| Conversion Factors
Pipe Data
Tubing Data |
|
Conversion Factors
| TO GO FROM |
MULTIPLY BY |
TO GET |
| Pressure |
| PSI |
6.895 |
KPa |
| PSI |
0.0680 |
atm |
| PSI |
0.0689 |
bar |
| PSI |
2.3067 |
ft. H2O |
| PSI |
2.036 |
in. Hg |
| PSI |
0.0703 |
kg/cm2 |
| PSI |
6895 |
Pa |
Temperature |
| °F |
0.556
(°F-32) |
°C |
| °C |
(1.8
x °C) + 32 |
°F |
| °C |
°C+273.15 |
°K |
| Volume |
| US
gal. |
128 |
fl. oz. |
| US
gal. |
230.8 |
cu. in. |
| US
gal. |
0.1337 |
cu. ft. |
| US
gal. |
3.785 |
liters |
| US
gal. |
0.8333 |
Imp. gal. |
| in3 |
16.39 |
ml |
| Length |
| inches
|
2.54 |
cm |
| meter |
39.37 |
inches |
| feet |
12 |
inches |
| cm |
0.3937 |
inches |
| meter |
3.28 |
feet |
| mile |
5280 |
feet |
| yard |
3 |
feet |
| Miscellaneous |
| US
gal. at 50°F |
8.33 |
lb. |
| kilogram |
2.2 |
lb. |
| GPM |
3.785 |
lpm |
| GPM |
0.134 |
cfm |
| grams |
0.03527 |
oz. |
| watts |
0.0738 |
lb. ft./sec. |
| hp |
0.746 |
kW |
| uS/cm |
0.65 |
TDS |
| uS/cm |
.63 |
Salinity |
Top of Page  |
|
Pipe
Data
Density (lbs./cu.in.)
/ Approx. Tensile Strength (PSI @ 73°F)
|
|
|
Steel:
0.2836 / 60,000 |
|
Aluminum
(6061): 0.098 / 30,000 |
|
300
Series Stainless: 0.286 / 75,000 |
|
PVC:
0.0498 / 7,940 |
|
CPVC:
0.0559 / 8,400 |
|
Water:
0.0361 / NA |
|
|
|
Nominal Size (in.) |
Avg. O.D. |
Avg. I.D. |
Nominal weight per 100 ft (lbs) |
Max work press (PSI) @ 75°F |
O.D. Volume of water per 100 ft (gal) |
I.D.Volume of water per 100 ft (gal) |
| 3/4"
Schd 80 PVC |
1.050 |
0.742 |
27.8 |
690 |
4.50 |
2.25 |
| 3/4"
Schd 40 SS |
1.050 |
0.824 |
113.1 |
3225 |
4.50 |
2.77 |
| 1"
Schd 40 PVC |
1.315 |
1.029 |
167.9 |
3079 |
7.06 |
4.32 |
| 1 1/4"
Schd 40 PVC |
1.66 |
1.36 |
43.4 |
370 |
11.25 |
7.55 |
| 1 1/2"
Schd 40 PVC |
1.90 |
1.59 |
51.8 |
330 |
14.74 |
10.32 |
| 2"
Schd 40 PVC |
2.375 |
2.067 |
69.5 |
280 |
23.01 |
17.43 |
| 2"
Schd 80 PVC |
2.375 |
1.939 |
94.9 |
400 |
23.01 |
15.34 |
| 2"
Schd 10 SS |
2.375 |
2.157 |
263.8 |
1835 |
23.01 |
18.98 |
| 2"
Schd 40 SS |
2.375 |
2.067 |
365.3 |
2593 |
23.01 |
17.43 |
| 4"
Schd 40 PVC |
4.50 |
4.026 |
204.3 |
220 |
82.62 |
66.13 |
| 4"
Schd 80 PVC |
4.50 |
3.826 |
283.3 |
324 |
82.62 |
59.72 |
| 4"
Schd 10 SS |
4.50 |
4.260 |
561.3 |
1066 |
82.62 |
74.04 |
| 4"
Schd 40 SS |
4.50 |
4.026 |
1079.0 |
2106 |
82.62 |
66.13 |
| 4 1/2"
J-55 PVC |
5.00 |
4.56 |
212.6 |
176 |
102.00 |
84.84 |
| 6"
Schd 40 PVC |
6.625 |
6.065 |
360.9 |
180 |
179.07 |
150.07 |
| 8"
Schd 40 PVC |
8.625 |
7.961 |
545.3 |
160 |
303.51 |
258.58 |
| This
information is meant to serve as a guideline only. INW is not responsible for its accuracy
or use. Materials should be tested under actual conditions to determine suitability. |
Top of Page |
|
Tubing Data
Density (lbs./cu.in.)
/ Approx. Tensile Strength (PSI @ 73°F)
|
|
|
Low
Density Polyethylene (LDPE): 0.0333 / 2,300 |
|
High
Density Polyethylene (HDPE): 0.0347 / 4,500 |
|
Reinforced
Vinyl: 0.0498 / 1,458 |
|
Polypropylene:
0.0326 / 5,000 |
|
FEP(Teflon®):
0.0758 / 3,000 |
|
|
|
Nominal Size (in.) |
Avg. O.D. |
Avg. I.D. |
Nominal weight per 100 ft (lbs) |
Max work press (PSI) @ 75°F |
O.D. Volume of water per 100 ft (gal) |
I.D.Volume of water per 100 ft (gal) |
Min bending radius (in) |
| 1/4"
LDPE |
0.25 |
0.170 |
1.1 |
120 |
0.255 |
0.118 |
1.0 |
| 3/8"
HDPE |
0.375 |
0.250 |
2.5 |
300 |
0.573 |
0.255 |
2.5 |
| 1/2"
HDPE |
0.500 |
0.375 |
3.6 |
225 |
1.020 |
0.573 |
6.0 |
| 5/8"
HDPE |
0.625 |
0.50 |
4.6 |
150 |
1.594 |
1.020 |
10.0 |
| 11/16"
LDPE |
0.6875 |
0.50 |
7.28 |
125 |
1.928 |
1.020 |
5.0 |
| 3/4"
reinforced vinyl |
0.75 |
0.50 |
18.0 |
162 |
2.295 |
1.020 |
4.0 |
| This
information is meant to serve as a guideline only. INW is not responsible for its accuracy
or use. Materials should be tested under actual conditions to determine suitability. |
Top of Page |
Teflon is a registered
trademark of the DuPont Company.
|
